Publications 2001-2007
Refereed Articles
1. G.J. Turvey and M. Salehi, ‘Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity’, Computers and Structures, 79 26-29, (2001), 2335-2348.
2. G.J. Turvey and R.J. Brooks, ‘Semi-rigid – simply supported shear deformable pultruded GRP beams subjected to end moment loading: comparison of measured and predicted deflections’, Composite Structures, 57 1-4, (2002), 263-277.
3. G.J. Turvey and P. Wang, ‘Open-hole tension strength of pultruded GRP plate’, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 156 1 (2003), 93-101.
4. J.T. Mottram and G.J. Turvey, ‘Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems’, Progress in Structural Engineering and Materials, 5 4, (2003), 195-222.
5. G.J. Turvey and C. Cooper,’ Review of tests on bolted joints between pultruded GRP profiles’, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 157 3, (2004), 211-233.
6. Y. Narita and G.J. Turvey, ‘Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation approach’, Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers (Part C), 218, (2004), 681-691.
7. G.J. Turvey and Y. Zhang, ‘Local buckling of axially compressed, pultruded GRP, WF-section, short columns – comparison of experimental and FE analysis buckling loads’, Applied Mechanics and Materials, 1-2 (2004), 87-92.
8. G.J. Turvey and Y. Zhang, ‘Tearing failure of web-flange junctions in pultruded GRP profiles’, Composites Part A: Applied Science and Manufacturing, 36 2 (2005), 309-317.
9. G.J. Turvey and M. Salehi, ‘Annular sector plates: comparison of full-section and layer yield predictions’, Computers and Structures, 83 28-30 (2005), 2431-2441.
10. G.J. Turvey and Y. Zhang, ‘Shear failure strength of web-flange junctions in pultruded GRP WF profiles’, International Journal of Construction and Building Materials, 20 1-2 (2006), 81-89.
11. G.J. Turvey and Y. Zhang, ‘Stiffness and strength of web-flange junctions of pultruded GRP sections’, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 158 SB6 (2005), 381-391.
12. G.J. Turvey and Y. Zhang, Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests’, Composites Part A: Applied Science and Manufacturing, 37 2 (2006), 152-164.
13. G.J. Turvey, ‘Structural analysis of CFRP-plated pultruded GRP beams’, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 159 SB2 (2006), 65-75.
14. G.J. Turvey and Y. Zhang, ‘A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns’, Computers and Structures, 84 22-23 (2006), 1527-1537.
15. G.J. Turvey and P. Wang, ‘Thermal preconditioning study for bolted tension joints in pultruded GRP plate’, Composite Structures, 77 4 (2007), 509-513.
16. G.J. Turvey, and P. Wang, ‘Failure of PFRP single-bolt tension joints under hot-wet conditions’, Composite Structures, 77 4 (2007), 514-520.
17. G.J. Turvey, ‘Analysis of bending tests on CFRP-stiffened pultruded GRP beams’, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 160 SB1 (2007), 37-49.
18. G.J. Turvey and P. Wang, ‘An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design’, Computers and Structures, xx (2007), xx. [In press, available online].
19. G.J. Turvey and M. Salehi, ‘Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener’, Thin-Walled Structures, xx (2008), xx. [In press] [Invited Paper].
20. M. Kadkhodayan, J. Alamatian and G.J. Turvey, ‘A new fictitious time for the Dynamic Relaxation (DXDR) Method’, International Journal for Numerical Methods in Engineering, xx (2008), xx. [In press].
Refereed Conference Papers
21. G.J. Turvey and M. Salehi, ‘Elasto-plastic large deflection of uniformly loaded sector plates’. Proceedings of the Third International Conference on Thin-Walled Structures (ICTWS 2001), 5th-7th June 2001, Cracow. Poland. Published in Thin-Walled Structures: Advances and Developments, Edited by J. Zaras, K. Kowal-Michalska, J. Rhodes, Elsevier, (2001), 631-640.
22. G.J. Turvey and P. Wang, ‘Single bolt tension joints in pultruded GRP material – effects of elevated temperature on load capacity’. Proceedings of the BSSM Conference on Strain Measurement in the 21st Century, 5th-6th September 2001, Lancaster University, (2001), 1-4.
23. G.J. Turvey and P. Wang, ‘Effects of elevated temperature on the structural integrity of bolted joints in pultrusions’. Proceedings of the International Conference on Composites in Construction (CCC 2001), 10th-12th October 2001, University of Porto, Portugal. Published in Composites in Constructions, Edited by J. Figueras, L. Juvandes, R. Faria, A.A, Balkema Publishers, (2001), 171-176.
24. G.J. Turvey, ‘Evaluation of the structural performance of box beams fabricated from a novel system of pultruded sections’. Proceedings of the International Conference on Composites in Construction (CCC 2001), 10th-12th October 2001, University of Porto, Portugal. Published in Composites in Constructions, Edited by J. Figueras, L. Juvandes, R. Faria, A.A. Balkema Publishers, (2001), 803-808.
25. G.J. Turvey, ‘Pultruded GRP frames: simple design analysis, a rational alternative and research needs for improved design’. Presented at the ASCE sponsored workshop on Composites in Construction: A Reality, 20th-21st July 2001, Capri, Italy. Publishhed in Composites in Construction: A Reality, Edited by E. Cosenza, G. Manfredi and A. Nanni, ASCE, (2002), 258-266. [Invited Paper]
26. G.J. Turvey and P. Wang, ‘A critique of the EUROCOMP method of design for bolted joints in pultruded GRP materials’, International Conference on Composites in Construction (ACIC 2002), 5th-7th April 2002, Southampton, UK. Published in Advanced Polymer Composites for Structural Applications in Construction, Edited by R.A. Shenoi, S.S.J. Moy, L.C. Hollaway, Thomas Telford Publishing, (2002), 301-308.
27. G.J. Turvey and Y. Zhang, ‘Tearing failure of web-flange junctions in pultruded GRP profiles’. Proceedings of the DFC-7 Conference on Deformation and Fracture of Composites, 22nd – 24th April, 2003, University of Sheffield. [Abstract published in conference proceedings]
28. G.J. Turvey and M. Salehi, ‘Annular sector plates: comparison of full-section and layer yield predictions’, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing, Topping, B.H.V. (ed.), Civil Comp Press, Stirling, (2003), 89-90. [Abstract published in conference proceedings]
29. G.J. Turvey and P. Wang, ‘Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material’, 7th World Pultrusion Conference, 18th – 19th March 2004, Amsterdam, The Netherlands, Paper 7, 1-16.
30. G.J. Turvey and Y. Zhang, ‘Shear failure strength of web-flange junctions in pultruded GRP profiles’, International Conference on Advanced Composites in Construction (ACIC 2004), 20th – 22nd April 2004, University of Surrey, Guildford, Surrey. Published in Advanced Polymer Composites (ACIC 2004), Edited by L.C. Hollaway, M.K. Chryssanthopoulos and S.S. J. Moy, Woodhead Publishing Limited, Cambridge, (2004), 553-560.
31. G.J. Turvey and A.Afifi, ‘Euler buckling of partially stiffened pultruded GRP columns: A comparison of shell finite element and beam-column model predictions’, International Conference on Advanced Composites in Construction (ACIC 2004), 20th – 22nd April 2004, University of Surrey, Guildford, Surrey. Published in Advanced Polymer Composites in Construction (ACIC 2004), Edited by L.C. Hollaway, M.K. Chryssanthopoulos and S.S.J. Moy, Woodhead Publishing Limited, Cambridge, (2004), 545-552.
32. G.J. Turvey, ‘An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams’, International Conference on Innovative Materials and Technologies for Construction and Restoration (IMTCR 2004), 6th – 9th June, 2004, University of Lecce, Lecce, Italy. Published in the Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration, Antonio La Tegola and Antonio Nanni (eds), Liguore Editore, Lecce, Italy, Vol.1: Keynotes, Materials, Construction, (2004), 578-588.
33. G.J. Turvey and N.Mulcahy, ‘Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs’. In Thin-Walled Structures: Advances in Research, Design and Manufacturing Technology, J. Loughlan (ed), Institute of Physics Publishing, Bristol, (2004), 927-934.
34. G.J. Turvey and Y. Zhang, ‘Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions’, BSSM (British Society for Strain Measurement) International Conference on Advances in Experimental Mechanics, 6th – 8th September 2004, York. Published in Advances in Experimental Mechanics, M. Lucas (ed), Trans Tech Publications, Uetikon-Zuerich, Switzerland, (2004), 87-92.
35. G.J. Turvey and Y. Zhang, ‘Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis’. In Advanced Composite Materials in Bridges and Structures, M.M. El-Badry and L. Dunaszegi (eds), The Canadian Society for Civil Engineering, Montreal, Canada. [abstract p.99; [CD-Rom Proceedings]
36. G.J. Turvey and Y. Zhang, ‘Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests’, International Conference on Composites Testing and Model Identification (CompTest 2004), 21st – 23rd September 2004, University of Bristol, Bristol. [CD-Rom Proceedings]
37. G.J. Turvey and Zhang, Y., ‘Finite element analysis of buckling and initial failure loads of short pultruded GRP columns’, In Proceedings of the Seventh International Conference on Computational Structures Technology, B.H.V. Topping and C.A. Mota Soares (eds), Civil-Comp Press, Stirling, Scotland. [abstract pp.57-58; [CD-Rom Proceedings]
38. G.J. Turvey and Y. Zhang, ‘Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths’. In FRP Composites in Civil Engineering - CICE 2004, R. Seracino (ed), A.A. Balkema Publishers, Leiden, (2004), 859-864.
39. G.J. Turvey and P. Wang, ‘Single-bolt tension joints in pultruded GRP plate – effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency’. In Proceedings of the 2nd International Conference on Joining Plastics 2006, 25th – 26th April 2006, London, Paper 9, 1-9.
40. G.J. Turvey and P. Wang ‘An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design’, 6th International Conference on Computational Mechanics (ECCM 2006), 5th – 9th June 2006, Lisbon, Portugal. [CD-Rom Proceedings].
41. G.J. Turvey, ‘Failure of pultruded GRP WF-section webs in compression – an experimental investigation’, In Proceedings of the 12th European Conference on Composite Materials (ECCM-12), 29th August – 1st September 2006, Biarritz, France. Paper 015; [CD-Rom Proceedings].
42. G.J. Turvey and Y-S. Zhang, ‘Opening mode failure of pultruded GRP angle leg junctions’. In Proceedings of the 3rd International Conference on Advanced Composites in Construction Conference (ACIC 2007), A.P. Darby and T.J. Ibell (eds.), 2nd – 4th April 2007, University of Bath, 389-393.
43. G.J. Turvey and M. Salehi, ‘Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener’. In Proceedings of Professor Jim Rhodes Retiral Conference on Thin-Walled Structures, 26th -27th June 2007, University of Strathclyde, Session 5. Paper 4, pp.27. [Invited Paper]
44. G.J. Turvey and P. Wang, ‘Effect of hole clearance on bolt loads in pultruded GRP tension joints’. In Proceedings of the 16th International Conference on Composite Materials, 8th – 13th July 2007, Kyoto, Japan. Paper Ref. FrHM1-03, pp.7. [CD Rom Proceedings].